| Customization: | Available |
|---|---|
| Certification: | / |
| Electric Tension: | 220V |
|
Still deciding? Get samples of US$ 120/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Auto-Control Electric-Heating Water Distiller
1. Brief Introduction
It is the ideal equipment for producing distilled water in laboratories and medical units. The distilled water is in accordance with the quality standard, which is stipulated in Chinese Pharmacopoeia of the People's Republic of China.
2. Scope of application
It applies in producing distilled water in laboratories of fields of medical treatment, health care, scientific research, chemical industry and colleges and universities.
3. Structure character
1. This product is made of imported high quality stainless steel and adopted the technology of stamping .
2. It has functions of water-deficient and power-off alarm and automatic make up water and heat again.
3. With power, heating instructions and water display.
4. Adopts the working principle of the electrode to prevent electrode fouling due to long working hours, lack of water power can not function properly
4. Major technical parameter
|
Model |
Voltage (V) |
Out put Quantity (L/h) |
Power (KW) |
|
WD-A5 |
220 |
5 |
5 |
|
WD-A10 |
380 |
10 |
7.5 |
|
WD-A20 |
380 |
20 |
15 |
5. Usage
1. Put the distilled water instrument in a convenient place for water supply and discharge, check the supply voltage if it is accord with the rated voltage of this product and install the earth leakage circuit-breaker and ground wire in the power circuit.
2. Close the discharge valve firstly, and then deliver the running water from the water inlet control valve to condensation cooler through rubber tubing. Note: (The pressure of running water is much bigger, so please don't turn the valve so big, only open a bit for the water flow) The running water flows into the hopper and then to the evaporation boiler from condensation cooler and warning pipe. (Note: The water injection warning pipe should not rinse the center of hopper, must rinse the side of hopper.) Till the water level rise to the center of glass water level mirror of evaporation boiler, or the hopper warning pipe begins to overflow, connect the power for about 10 minutes, then the water in the evaporation boiler begins to boiling, when the distilled water drained out of the outlet, adjust the water inlet control valve to control the water supply quantity of cooling water, till the distilled water runs off in balance.
6. Points for attention
1. If the natural water or well water used for producing distilled water, it must be adopted the chemical treatment and the water quality must be accord with the GB5749standard.
2. The rubber tubing for distilled water should not be so long. Don't insert it into the water for avoiding steam block and the water emit from hopper.
3. Must keep the steady pressure of running water otherwise the water is easy to overflow.
4. Don't cut the water supply.
7 . Maintenance
1. Wash the evaporation boiler clean the boiler without any water and change the fresh water before use every time for ensuring the water quality.
2. Condensation cooler is made of metal material , so when you use it first time, you must make pre-steam for 10-16hours. After the quality of distilled water is passed, you could use it. After this, you should make pre-steam for 30 minutes before use every time, the distilled water produced in this way could be used.
3. Empty the water after every use clean and wash it for cleaning.
4. The temperature of surface of distilled water instrument is much high when it works, so don't touch for avoiding scald.
Our Services
BIOBASE Worldwide Service:FAQ
1.Why choose BIOBASE?
){kind=link}